ST2
Fully Automatic Shrink Tunnel
The VC999 ST2 package shrink tunnel is a fully automatic in-line spray tunnel. A hot water cascade is used to shrink the packaging. The continuous throughput enables cost-effective shrinking of large production volumes. The VC999 ST2 does not require compressed air, thus enabling energy-saving operation. The high-quality insulation prevents heat loss.
The Perfect compliment to VC999 Vacuum Packaging Machines.
- Stainless steel construction, Cr/Ni 1.4301 (AISI 304)
- Touch screen display with pictograms
- Discharge to right or left side
- Electrical or steam heating
- Built in steam extractor system
- Dry run security
- Conveyor speed adjustable
- Automatic water temperature control
- Automatic water drain and supply after decalcifying process
- Pre-heating timer
- Photocell detection for economic shower process
- Operation without shower possible (conveyor function)
- Automatic error diagnostic
- CE Conform
- GS Certified
Specifications
| Model | VC999 ST2 |
|---|---|
| Power supply | electrical 40,7 kW 80 AT / steam 0,7 kW 6 AT |
| Steam exhaust | Ø 160 mm inside |
| Water connection | R ½” outside |
| Option in-feed / outlet rollers | |
| Volume of water | 175 l |
| Width of Conveyor | 850 x 330 x 1200 mm |
| Max. product height | 330 mm |
| Capactiy | continuous run |
| Conveyor speed | 0,2 – 0,8 m/s |
| Width of conveyor | 850 mm |
| Weight | ca. 480 kg (without roller extension/belts) |
Technical changes reserved
- Electrical or steam heating
- Automatic decalcifying system
Fully Automatic Shrink Tunnel
The VC999 ST2 package shrink tunnel is a fully automatic in-line spray tunnel. A hot water cascade is used to shrink the packaging. The continuous throughput enables cost-effective shrinking of large production volumes. The VC999 ST2 does not require compressed air, thus enabling energy-saving operation. The high-quality insulation prevents heat loss.
The Perfect compliment to VC999 Vacuum Packaging Machines.
- Stainless steel construction, Cr/Ni 1.4301 (AISI 304)
- Touch screen display with pictograms
- Discharge to right or left side
- Electrical or steam heating
- Built in steam extractor system
- Dry run security
- Conveyor speed adjustable
- Automatic water temperature control
- Automatic water drain and supply after decalcifying process
- Pre-heating timer
- Photocell detection for economic shower process
- Operation without shower possible (conveyor function)
- Automatic error diagnostic
- CE Conform
- GS Certified
Specifications
| Model | VC999 ST2 |
|---|---|
| Power supply | electrical 40,7 kW 80 AT / steam 0,7 kW 6 AT |
| Steam exhaust | Ø 160 mm inside |
| Water connection | R ½” outside |
| Option in-feed / outlet rollers | |
| Volume of water | 175 l |
| Width of Conveyor | 850 x 330 x 1200 mm |
| Max. product height | 330 mm |
| Capactiy | continuous run |
| Conveyor speed | 0,2 – 0,8 m/s |
| Width of conveyor | 850 mm |
| Weight | ca. 480 kg (without roller extension/belts) |
Technical changes reserved
- Electrical or steam heating
- Automatic decalcifying system
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec quis massa condimentum, viverra tortor nec, sagittis neque. Nunc pharetra efficitur nibh, a pretium nibh viverra vitae.
Peter White
Store manager
SC200TA PROCESS
Multi–package cycle and easy film roll change and tension control.
Emerigency shutdown, electronic safety checks with notifications on screen, total power lock-off switch for safe maintenance.
Only sealing, vacuum, gas or skin packs, various package dimensions.
Precise temperature control for heating and sealing from touch screen.
OPTIONS
- Photo cell for printed film
- Liquid separator in the vacuum line
- Particle filter for vacuum pump
- MAP with O2>21% (oxygen safe vacuum pumps)
- Integrated gas flash system for two different gas mixtures for easy approaching and selection from HMI
- Outfeed belt conveyor
- Synchronisation with additional equipment: automatic tray denester, dosing system, printer, labelling system, etc.
- Autonomous water cooling
- Trolley for tools replacement and storage
PARAMETERS
- Machine weight: 850 kg / 1340* kg
- Machine dimensions: 2055 x 1122 x 1790 mm, 3400 x 1122 x 1790* mm
- Electrical parameters: 400V-3P-50Hz, 220V-3P-60Hz
- Compressed air: 6 - 7 bar
- Protective gas: 2 - 6 bar
FORMAT LAYOUTS
AND TRAY
DIMENSIONS
- Tray depth: up to 90 mm
- Tray depth for SKIN: up to 30 mm
- Product height for SKIN without protruding: up to 25 mm
- Product height for SKIN with protruding: up to 50 mm
- Product protrusion: up to 30 mm
